1067 Yonge Street is a Passive House-designed residence by Dewson Architects. We installed the full roofing and exterior architectural metal package: natural slate, Rheinzink standing seam, Soprema SBS flat roofing, zinc cladding and James Hardie siding.
The project is valued at approximately $1.8 million. The residence required close attention to thermal performance, airtightness, moisture management and long-term durability, with every roofing and wall assembly engineered to minimize thermal bridging.
All components were installed in accordance with manufacturer specifications, CRCA guidelines and industry best practices.
Scope of work
39 itemsScope of Work
Rainscreen wall assembly behind zinc flat-lock panels
Soprema cold-applied SBS flat roofing components
Custom zinc fabrication
20-Year Soprema Platinum Warranty
The low-slope roofs were installed by Soprema PAQ+S certified installers and qualified for a 20-Year Soprema Platinum Warranty, one of the highest levels of manufacturer-backed protection for commercial-grade SBS roofing systems.
In detail
High-Performance Roofing & Wall Assemblies
The roofing and wall systems were designed as complete building envelope assemblies, with every layer serving a purpose in moisture management, thermal efficiency, ventilation and durability.
The natural slate roof was installed over Delta Vent S breathable underlayment, with Delta Multi-Band seam tape and Delta Flex Band penetration flashings forming a secondary drainage plane beneath the slate. Custom fabricated pre-patina graphite zinc valleys, hip soakers, drip edges and flashings were used throughout.
The Rheinzink GRANUM Basalte standing seam roof was installed over Delta Trela ventilated separation membrane, allowing continuous airflow beneath the zinc. Concealed stainless steel expansion clips let the panels expand and contract with seasonal temperature changes while keeping the seams straight.
Advanced Rainscreen Wall System
The exterior walls were built as fully ventilated rainscreen systems. Behind the zinc flat-lock panels, the assembly combines continuous Rockwool insulation, thermally broken clips, Z-girts and air and vapour barriers. This reduces thermal bridging while allowing continuous drainage and ventilation.
The James Hardie siding assemblies were designed similarly, with 6" Rockwool Comfortboard, Blueskin air barrier membranes, plywood sheathing, wood strapping and galvanized Z-bars where required.
Soprema Platinum Roofing Systems
The low-slope roof areas were completed with multiple Soprema cold-applied SBS modified bitumen systems, each engineered for its specific roof configuration.
Architectural Zinc Craftsmanship
Every visible zinc component on the residence was custom fabricated by Skyluxe to create a cohesive appearance, with corrosion resistance, minimal maintenance and a long service life.
Because the home was designed around Passive House principles, each roofing and wall assembly required careful attention to thermal continuity, airtightness and moisture control.
On site
Architectural Cladding · ICI Roofing · RestorationHave a roof, deck or wall assembly on the table?
Send us the drawings or the address. We will walk the assembly with you and come back with a scoped number.

